Constant's Playground

Q: Is their any way to increase the scheduled time for pop connector to retrieve mail from 15 minutes to less time?

A: This is officially unsupported, but you can try the following method.

(Warning If you use Registry Editor incorrectly, you may cause serious
problems that may require you to reinstall your operating system.
. Use Registry Editor at your own risk.)

1. Click "Start", click "Run", type "regedit" (without the quotation
marks) in the "Open" box, and then click "OK".

2. Locate and then click the following registry subkey:

"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SmallBusinessServer\Network\POP3
Connector"

3. On the "Edit" menu, point to "New", and then click "DWORD Value".

4. Type "ScheduleAccelerator" (without the quotation marks) as the entry
name, and then press ENTER.

5. On the "Edit" menu, click "Modify".

6. In the "Value data" box, type the value that you want, and then click
"OK". To determine the polling interval, the value that is configured on
the "Scheduling" tab in the GUI is divided by the value that you type for
the ScheduleAccelerator entry. For example, if a 15 minute interval is
specified in the GUI and you set the value of the ScheduleAccelerator
entry to 3, the connector will poll ever five minutes.

7. Quit Registry Editor.

Open a new file in NotePad

Copy & Paste the following command:

———-

REGEDIT4

[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem]
"DisableRegistryTools"=dword:00000000
[HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionPoliciesSystem]
"DisableRegistryTools"=dword:00000000
———-

Save this as unlock.reg. To lock the registry, change both dword:00000000 to dword:00000001 and save as lock.reg.

You can also download these files in the download section of the website.

To lock/unlock the registry double click on the respective registry file.
Works for all versions of windows. Modifying the registry can cause your pc to crash or prevent booting. Please backup your registry and use caution at all times. We are not responsible for any crashes or failures.

The information in this article applies to:
Microsoft Internet Explorer version 6 for Windows XP
Microsoft Internet Explorer version 6 for Windows 2000
Microsoft Internet Explorer version 6 for Windows Millennium Edition
Microsoft Internet Explorer version 6 for Windows 98 Second Edition
Microsoft Internet Explorer version 6 for Windows NT 4.0
Microsoft Internet Explorer version 6 for Windows 98
Microsoft Internet Explorer 5.0 for Windows 98 Second Edition
Microsoft Internet Explorer 5.0 for Windows 98
Microsoft Internet Explorer 5.0 for Windows NT 4.0
Microsoft Internet Explorer 5.0 for Windows 95
Microsoft Internet Explorer 5.01 for Windows 2000
Microsoft Internet Explorer 5.01 for Windows 95
Microsoft Internet Explorer 5.01 for Windows 98
Microsoft Internet Explorer 5.01 for Windows 98 Second Edition
Microsoft Internet Explorer 5.01 for Windows NT 4.0
Microsoft Internet Explorer 5.5 for Windows 2000
Microsoft Internet Explorer 5.5 for Windows 95
Microsoft Internet Explorer 5.5 for Windows 98
Microsoft Internet Explorer 5.5 for Windows 98 Second Edition
Microsoft Internet Explorer 5.5 for Windows Millennium Edition
Microsoft Internet Explorer 5.5 for Windows NT 4.0
This article was previously published under Q320159

SYMPTOMS
When you use Microsoft Internet Explorer, you may experience any of the following symptoms:
Your Internet Explorer home page has been changed to a different Web site than the one that you selected.
You cannot change your home page selection to the Web site that you want.

For example, when you try to change your home page in the Internet Options dialog box on the Tools menu, you may not be able to type an address in the Address box, and the following buttons may be unavailable:
Use Current
Use Default
Use Blank
You reset your home page to the Web site that you want in Internet Options, but after you restart your computer your home page selection has again been changed to a different Web site.

繼續閱讀 »

文章編號 : 324129
上次校閱 : 2005年10月18日
版次 : 4.1簡介

如果您在使用 CD-R 光碟機、CD-RW 光碟機、DVD 光碟機，或 CD-ROM 光碟機讀取光碟片時發生問題，請參閱下列「Microsoft 知識庫」文件：

如果您在使用 CD-R 光碟機、CD-RW 光碟機、DVD 光碟機，或 CD-ROM 光碟機讀取光碟片時發生問題，請參閱下列「Microsoft 知識庫」文件：

321641 (http://support.microsoft.com/kb/321641/) 如何疑難排解讀取 CD、CD-R、CD-RW 和 DVD 光碟時出現的問題

在嘗試對光碟片寫入資料時，您可能會遭遇下列問題：
• 收到各種光碟片寫入錯誤訊息。
• 使用光碟機與 Windows XP 內建燒錄功能時發生問題。
• 使用協力廠商程式，將資料寫入光碟片時發生問題。

繼續閱讀 »

文章編號 : 314082
上次校閱 : 2005年6月1日
版次 : 3.3

結論
本文將告訴您，將系統磁片移至備份電腦上，然後嘗試啟動 Microsoft Windows XP 備份電腦時可能會收到「停止」錯誤的原因。如果大型存放體控制卡的登錄項目和驅動程式不是安裝在 Windows XP 中，就會發生這個問題。如果要解決這個問題，請在備份電腦中使用相同的硬體。

徵狀
當您將 Microsoft Windows XP 系統 (開機) 磁片移至備份電腦上，然後嘗試啟動 Windows XP 備份電腦時，可能會收到下列「停止」錯誤：
STOP: 0x0000007B (0xF741B84C,0xC0000034,0×00000000,0×00000000)
INACCESSIBLE_BOOT_DEVICE

發生的原因
如果備份電腦中大型存放體控制卡硬體的登錄項目和驅動程式不是安裝在 Windows XP 中，可能就會發生這個錯誤。

就整合式電子裝置 (IDE) 控制器而言，可以使用數種不同的晶片組，例如 Intel、VIA 及 Promise。每種晶片組各有不同的隨插即用識別碼 (Plug-n-Play identifier，PnP-ID)。

啟動之前，必須先將備份電腦的大型存放體控制卡 PnP-ID 資訊儲存在登錄中，如此 Windows XP 才能初始化正確的驅動程式。

繼續閱讀 »